Orshel Store

1. Installation and Wiring
   

One 2S1C smart panel can control 2 lighting and 1 curtain touch (Open/Close). It is suitable for 2 Modular Gang box.

Curtain open/close/stop operation:

-To open/close the Curtain, tap the open/close button.

-To stop the curtain, just tap the running button again to stop

-To change the motor movement direction, just to tap the reverse button;

Input: Line in/Neutral input: 110~230VAC

Output:

-Lighting output: 110~230VAC, 16A Max

-Curtain motor: 110~230VAC, 5A Rank

• Touch button mode

For touch button to control the lighting, device supports two modes: Bistate mode and Monostate mode:

Default mode is Bistate mode, it can be set from APP. Button mode is valid in Lighting switch button only (button #1 and button #3).

• Enter Network pairing mode

If button is working in Bistate mode:

– Press and hold the button till red backlight ON then release (around 10 seconds) to enter configuration state. White leds will blink.

– Press and hold the button again till red backlight ON then release (around 5 seconds) to enter network pairing state, Red leds will blink.

If button is working in Monostate mode

– Tap shortly the button 10 times to enter device configuration state. White leds will blink;

– Tap shortly the button 5 times again to enter network pairing state. Red leds will blink;

Following the APP instruction to finish the network pairing. While network pairing, white leds will blink.

While device stays in configuration or network paring state, tap or press any button to exit the led blinking state. Then repeat the button operation procedure to enter the configuration/network paring state again.

• Device factory reset

While device stays in device configuration state (after 10 seconds press or 10 times tap), then:

-Press any bistate button till backlight turns Red or for 10 seconds or Tap 10 times on monostate button again, Red leds will stay on, then

-Tap any button again to factory reset within 10 seconds. 10 seconds timeout will exit the factory reset.

• Production Configuration

5.1 Power- on status

–Power Off: While product is powered, all output terminals are turned off.

–Power On: While product is powered, all output terminals are turned on.

–Restart memory: While product is powered, the output can be restored from state before powered off.

5.2 Backlight setting

-Backlight on Color: Red/Blue/While/None option available for output ON state color;

-Backlight off Color: Red/Blue/While/None option available for output OFF state color;

-Backlight brightness: 0(Min)~100(Max) percentage.

5.3 Button Mode

Definition of Button mode, please refer to Section 2. While button mode changes, output will be turned off first.

5.4 Curtain running setting:

-Motor direction: Forward/Reverse to change the motor driver Line direction

-Curtain quick calibration: quickly set the full open/full close running time

Share on Facebook

Post on X

Follow us

Save